PrivateLinen - Components

Doors

There are 5 different types of doors. All doors are made of stainless steel or stainless steel + primer, noise damped and have a cylindrical lock. The doors can be mounted with a stainless steel or a pvc chute. Some door types for the stainless steel chute are bigger than those for the pvc chutes.

Door type 1 and 11 are opening to the outside. The doors for the pvc-chute are square with an assembly dimension of h 300 x w 300 mm and dimension of the cover of h 400 x w 400 mm. The doors for the stainless-steel-chute are rectangle with an assembly dimension of h 400 x w 300 mm and dimension of the cover of h 500 x w 400 mm.

Door type 2 and 12 are opening to the inside. The doors for the pvc-chute are square with an assembly dimension of h 300 x w 300 mm and dimension of the cover of h 400 x w 400 mm. The doors for the stainless-steel-chute are rectangle with an assembly dimension of h 400 x w 300 mm and dimension of the cover of h 500 x w 400 mm.

Door type 3 and 13 are opening to the rightern side. The doors for the pvc-chute are square with an assembly dimension of h 300 x w 300 mm and dimension of the cover of h 400 x w 400 mm. The doors for the stainless-steel-chute are rectangle with an assembly dimension of h 400 x w 300 mm and dimension of the cover of h 500 x w 400 mm.

Door type 4 and 14 are opening to the leftern side. The doors for the pvc-chute are square with an assembly dimension of h 300 x w 300 mm and dimension of the cover of h 400 x w 400 mm. The doors for the stainless-steel-chute are rectangle with an assembly dimension of h 400 x w 300 mm and dimension of the cover of h 500 x w 400 mm.

The doors of type 5a and 15a are opening to the top and have a square cover. This type of door is identical for the pvc- and the stainless steel-chute.

The doors of type 5b and 15b are opening to the top and have a round cover. This type of door is identical for the pvc- and the stainless steel-chute.

Tubes

A chute is built of tubes without and tubes with throat. Very seldom deflections are necessary. he tubes are made of stainless steel or pvc according to DIN 19543. The usual diameter is 300 mm.

Tubes made of stainless steel have a net length of 440 mm or 940 mm. The thickness is 0.6mm. Tubes made of pvc have a net length of 1000 mm or 2000 mm. The tubes made of pvc can be trimmed at the site. The tubes made of stainless steel have to be trimmed at the factory.

Tubes with throat made of stainless steel have a net length of 940 mm and a sheet thickness of 1 mm. The length of the throat is 300 mm and the dimension of the opening is h 400 x w 300 mm. Tubes with throat made of pvc have a net length of 1000 mm. The length of the throat is 300 mm and the dimension of the opening is h 300 x w 300 mm.

Deflections are fitted.

Fastening

With help of a shaft base plate the chute is fixed to the ceiling.

With help of a double clamp free hanging tubes are fixed to the chute.

 Accessoires

With help of a swinging flap the chute can be closed. By using a weight the opening of the chute can be controlled.

A chute gate has a similiar function as a swinging flap. A short and a long version is available

Is a discharge chute at the end of the chute, a look up flap is used instead of a swinging flap or a chute gate.

If the laundry is not to drop vertical down, a discharge chute has to be used. It is available as a standard in 60° or 90°. Other angles are possible too.

A laundry waggon is used to collect falling laundry. Thus it is easy to transport.